Glass, ceramics , waste wood crusher OGK-1800
| The strength of this machine lies in secondary
crushing of roof tiles from demolished buildings as well as waste
wood. |
(1) Dumping hopper (2) control panel (3) conveyer for out-put removal |
Size of the end product can easily and quickly be adjusted by changing
the size of the screen ( see the picture ). |
Features
- OGK-1800 uses crushing teeth of swing hammer method which can
well stand even metal objects wich happen to be among the waste.
- By changing the bottom screen, the particle size of the end
product can easily be adjusted within the range of 7-60 mm.
- Excellent in dustproof and noise insulation, because the crusher
is installed in a cover box.
- Moreover, the vibration of this machine is very low because
the crusher is fixed on the dampers that absorb vibration.
|
Specification
| Model |
OGK-1800 |
| Main body dimensions (mm) |
Full length 6000mm（includes the operation
board, a conveyer ）
Width 2300mm
Height 2940mm (not including the ladder) |
| Dumping hopper |
Length 3000mm × depth
1560mm |
| Particle size of end product |
20mm(Ordinary)
・ changed by screen |
| Automatic supply device
output |
3.7kw |
| Motor output |
22kw（changeable to 45kw for small pieces
of wood） |
| Conveyer output |
1.5kw |
| Total motor output |
27.2kw |
| Processing capacity |
18t/8h～4t/8h |
| Main body weight |
About7000kg |
| Voltage |
200 V |
|
About the end product
- Mixture of over –sized pieces is very few.
- The proportion of the flat end product is smaller by using
the fine mesh screens even when plate shaped wastes like roof
tiles are crushed.
- Using screens with finer meshes will result in rounding the
particles of the end product of such materials as ceramics, glass
and other materials which tends to have sharp edges when crushed.
|
